Install Windows Server

Machbase supports windows server.

Table of Contents


You can download the current 3.5.0 version of MSI file from the link here or go visit download page.


When you run the downloaded file, the dialog box will be displayed as shown below.

Figure 1- Installation start

When you click "Next", you will need to select in which folder you want to install.

Figure 2- Select Installation Folder

When you click "Next", a dialog box pops up to check whether you want to go for installation.

Figure 3- Confirm installation

When you click "Next", a dialog box will show the process of installation.

Figure 4- Being installed

Now you will reach to the installation complete page.

Figure 5- Select an option

ODBC Settings

In Control Panel, click Administrative Tools, and then Data Sources (ODBC) to change the settings.

Figure 1- ODBC

Click "Add" from the window above, and select machodbc as shown below.

Figure 2- Create a driver

Enter the IP address and port number in a location where Machbase Server is installed.

The default settings for Machsql is SYS for User ID and MANAGER for password.

Figure 3- Server setting

Click "Try Connect!" to see if the server is connected. If it is connected, you can see "Connection Successful" as shown below.

Figure 4- Connected successfully

Now you have ODBC connected to Machbase.

Figure 5- Machbase Connected

results matching ""

    No results matching ""